Pemko Z-Brackets for Mounting Additional Hardware Bringing Gaskets and Door Closers Together Pemko Z-Brackets for Mounting Additional Hardware The Pemko door closer/strike plate mounting Z-brackets enable soffit-mounted perimeter gaskets and parallel arm door closers or strike plates to be used in the same opening. When mounted separately, door closers and soffit-mounted perimeter gaskets occupy the same space on a frame's header. Z-brackets make this installation easy. Simply install the perimeter gasket in its desired position, attached a bracket over it, then mount the door closer arm bracket to the Pemko Z-bracket. Strike plates can also be mounted to these Z-brackets. This eliminates the need to cut or shorten the perimeter gasket around the strike plate and allows for a continuous seal along the jambs. Combine these Z-brackets with Pemko perimeter gasketing, astragals, door bottoms or thresholds to further increase the energy efficiency of the opening. Features Benefits Thick steel construction Ensures reliability in the opening Included in UL File with Perimeter Gaskets Use on Fire Rated openings Mount the door closer bracket or strike plate directly to the Z-bracket Eliminates the need to cut perimeter gaskets to fit additional frame hardware Part Number Offset Dimension Finishes BKT050_ 1/2" Zinc-Coated Steel, Gray Powder Coat BKT075_ 3/4" Zinc-Coated Steel, Gray Powder Coat BKT1532_ 1 1/8" Zinc-Coated Steel, Gray Powder Coat For additional information contact your local sales representative, ASSA ABLOY Door Security Solutions Representative, or call 800-346-7707.