Pemko _FM_SLISF_HD Safety Hinge

Heavy Duty Anodized Aluminum Full Mortise, Short Leaf Inset Continuous Ggeared - are designed mainly for new door applications in child care and nursing facilities. These hinges require extra clearance. Also available in standard duty models.

  • Applied to conceal both leaves.
  • BL (Black Anodized) and PW (Painted White) are special finishes available upon request.
  • Fasteners are No. 12-24 x 11/16" #10 Head FHUC, Type C, threadforming, no tapping required.
  • Heavy duty model: 20 fasteners required for each leaf.
  • Wood screws available on request (specify on order).
  • Heavy duty hinge (HD1): 3" between bearing centers.
  • Heavy duty hinge (HD3): 3" between bearing centers.
  • HD1 hinges conform to Grade 2-150, Grade 1-300, and Grade 1-600 cycle requirements per BHMA standard ANSI/BHMA A156.26-2006.
  • HD3 hinges conform to Grade 3-150, Grade 3-300, and Grade 3-600 cycle requirements per BHMA standard ANSI/BHMA A156.26-2006.
  • All hinges meet criteria of UBC 7.2 for positive pressure.
  • Special patented FirePins are only required on 3-Hour (A-Label) assemblies.
  • Certain door and frame conditions may require an extra 1/32"-1/16" clearance. Excessive clearance on fire rated assemblies may violate the requirements for NFPA 80.
  • PemkoHinge® products are guaranteed for the life of the opening against defects in material or workmanship with the exception of AL, RS, standard duty and Grade 3 hinges, which carry a 10 year warranty.
  • Weight bearing (per BHMA standard ANSI/BHMA A156.26-2006) for heavy duty models: 83" and 85" = 27 bearings, door weight = 540 lbs.; 95" = 31 bearings, door weight = 620 lbs.; 120" = 39 bearings, door weight = 780 lbs.
  • Special hinge reinforcements are not required. Hollow metal door and frame manufacturers’ standard is acceptable. Removal of hinge reinforcements in the door and frame is not advised.
  • Width: 13/16” (20.6 mm) (between frame edge and door edge, square edge door applications).
  • Width: 27/32” (21.4 mm) (between frame edge and door edge, beveled edge door applications).
  • Cap Width: 25/32” (19.8 mm).
  • Height: 1-1/2” (38.1 mm) (frame edge side - leaf).
  • Height: 1-19/32” (40.5 mm) (to flange/door edge side - leaf).
  • Weight

Ratings

BHMA Certified BHMA Certified

Finishes

BL - Black BLFMSLISF-HD1: BL - Black Anodized Aluminum, (Special Order Finish)

BL - Black BLFMSLISF-HD3: BL - Black Anodized Aluminum, (Special Order Finish)

C - Clear CFMSLISF-HD1: C - Clear Anodized Aluminum

C - Clear CFMSLISF-HD3: C - Clear Anodized Aluminum

D - Dark Bronze DFMSLISF-HD1: D - Dark Bronze Anodized Aluminum

D - Dark Bronze DFMSLISF-HD3: D - Dark Bronze Anodized Aluminum

PW - Painted White PWFMSLISF-HD1: PW - Painted White Aluminum, (Special Order Finish)

PW - Painted White PWFMSLISF-HD3: PW - Painted White Aluminum, (Special Order Finish)

SN - Satin Nickel SNFMSLISF-HD1: SN - Satin Nickel Anodized Aluminum, (Special Order Finish)

SN - Satin Nickel SNFMSLISF-HD3: SN - Satin Nickel Anodized Aluminum, (Special Order Finish)

Interested in this product?

Contact us to order