Pemko _FS_ Full Surface Hinge

Standard Duty Anodized Aluminum Continuous Geared

• Designed mainly for retrofit work
• Applied to the exposed surfaces of the door and frame 
• Available in heavy duty models

Fasteners, Frame:

• #12-24 x 7/16" FHUC, Type C threadforming, no tapping required
• 10 fasteners required per frame leaf
• Wood screws available upon request

Fasteners, Door:

• #12-24 x 11/16" Pan Head, self-drilling, self-tapping
  - 6 required per door leaf
• 1/4-20 x 1-5/8".Thru-Bolt & 1/4-20 x 1" Shoulder Bolt 
  - 4 required per door leaf 

Specifications:

• Standard duty hinge: 6" bearing spacing
• Special hinge reinforcements are not required. Hollow metal door and frame manufacturer's standard is acceptable. Removal of hinge reinforcements in the door and frame is not advised. 

Certifications:

• Certified to ANSI/BHMA A156.26-2017, Grade 1-300
• Tested and certified by Underwriters Laboratories Inc. (USA and Canada) to UL10C
  - Certified up to a 3-Hour A-Label fire listing for all 4' 0" x 10' 0" (single) and 8' 0" x 10' 0" (pair) door and frame assemblies. Special FirePins required on 3-hour (A-label) assemblies.
  - Fire listing certifications apply to all approved hollow metal and wood door assemblies in drywall on masonry construction
• Some door and frame conditions may require an extra 1/32" - 1/16" of clearance. Excessive clearance on fire-rated assemblies may violate the requirements for NFPA 80