Pemko R1.75FMR_ Flush Threshold Assembly

Pemko modular ramps are ADA compliant as they meet the standard of a 1:12 slope.
The wings for these ramps do not meet the ADA 1:10 slope requirements.
In order to make the sides of the ramp ADA compliant, they must follow the ADA guidelines as follows:
Section 4.7.5 "Sides of Curb Ramps":
If a curb ramp is located where pedestrians must walk across the ramp, or where it is not protect by handrails or guardrails, it shall have flared sides; the maximum slope of the flare shall be 1:10.
Section 4.8.7 "Edge Protection":
Ramps and landings with drop-offs shall have curbs, walls, railings, or projecting surfaces that prevent people from slipping off the ramp.
Curbs shall be a minimum of 2" high.
Pemko recommends the use of mitered returns to seal up the side of the ramp.
Otherwise, we recommend filling and feathering the threshold ends with grout (do not leave threshold ends open).

Ratings

BHMA Certified BHMA Certified