Pemko Care and Maintenance

General Care and Maintenance Information

Cleaning:

PEMKO’s aluminum products and solid gasket products can be cleaned with a mild soap with warm water. A clean non-abrasive cloth should be used to clean the surface of these products. For removing grease, sealant, or other minimal adhesives a mild solvent such as mineral spirits may be used; then clean with mild soap mixed with warm water. To dry, either allow to air dry or wipe dry with a chamois, squeegee, or lint-free cloth.For sponge gasket and weatherstrip products, wipe with a damp cloth. Do not use mineral spirits or other chemical as this may cause the plastic to “melt” or deteriorate. To dry, either allow to air dry or wipe dry with a chamois, squeegee, or lint-free cloth.The use of strong solvents or cleaner concentrations may cause damage to the finish surface and isn’t recommended.

Maintenance:

PEMKO’s products are generally low-maintenance and require nothing more than general cleaning. Should anything outside of “general cleaning” arise, please consult PEMKO Customer Service.If you have any questions, or if you have a situation outside this scope, please contact PEMKO Customer Service.

Pemko Care and Maintenance