Finish Code
|
Finish
|
Cleaning Instructions
|
| US3 |
Polished & lacquered brass |
Use a soft cloth and mild soap and water. Never use brass polish or an abrasive cleaner unless you intend to remove all lacquer and totally refinish the product. |
| US3NL |
Polished unlacquered brass |
Use a soft cloth and a good metal cleaner. We recommend Mr. Metal by S. C. Johnson Company. |
| US4 |
Satin finish & lacquered brass |
Use a soft cloth and mild soap and water. Never use brass polish or an abrasive cleaner unless you intend to remove all lacquer and totally refinish the product. |
| US9 |
Polished & lacquered bronze |
Use a soft cloth and mild soap and water. Never use brass polish or an abrasive cleaner unless you intend to remove all lacquer and totally refinish the product. |
| US10 |
Satin finished & lacquered bronze |
Use a soft cloth and mild soap and water. Never use brass polish or an abrasive cleaner unless you intend to remove all lacquer and totally refinish the product. |
| US10B |
Oxidized & oiled bronze |
Use a soft cloth and a paste furniture wax. Buff lightly so as not to remove the dark oxide coating where it remains. |
| US26 |
Polished chrome plated |
Use a soft cloth and a good metal cleaner. We recommend Mr. Metal by S. C. Johnson Company. |
| US26D |
Satin chrome plated |
Use a soft cloth and a good metal cleaner. We recommend Mr. Metal by S. C. Johnson Company. |
| US28 |
Anodized aluminum |
Use a soft cloth and mild soap and water. |
| 313/315 |
Dark bronze or black anodized aluminum |
Use a soft cloth and mild soap and water. |
| US32 |
Polished stainless steel |
Use a soft cloth and a good metal cleaner. We recommend Mr. Metal by S. C. Johnson Company. |
| US32D |
Satin stainless steel |
Use a soft cloth and a good metal cleaner. We recommend Mr. Metal by S. C. Johnson Company. |
| US32DMS |
Satin MicroShield Coated |
Use a soft cloth and mild soap and water. Never use brass polish or an abrasive cleaner unless you intend to remove all lacquer and totally refinish the product. |
| US32D316 |
Satin stainless steel |
Use a soft cloth and a good metal cleaner. We recommend Mr. Metal by S. C. Johnson Company. |
| US32316 |
Polished stainless steel |
Use a soft cloth and a good metal cleaner. We recommend Mr. Metal by S. C. Johnson Company. |
|
Santoprene™ Grip Zones |
Use mild soap and water. |
| |
Powder Coats |
Use mild soap and water. |
| |
Wood |
Use a soft cloth and dampen with water. Make sure the cloth is wrung out well. Wipe down the wood pull and dry with a dry towel or cloth. To best help in protecting your wood pull, we recommend ordering with a clear coat. |
CAUTION: Always try the recommended procedure in a small inconspicuous spot prior to treating the entire article to verify it works on your particular application and you are satisfied with the results.
NOTE: Frequent cleaning extends the life of all finishes.